Back to Top

GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Intelligent Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation

What Makes GHB Solar Charge Controller Different!

GHB solar charge controller adopts the advanced digital techniques and operates fully automatically. LCD screen display makes all much more clear. Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.It has various unique functions and quite easy to use.

Speicifications:

Overload/Short Circuit Protection: 1.5 Times by Rated Current
Voltage of Battery: 12V / 24V Automatic
Rated Charge/Discharge Current: 20A
USB Output Voltage: 5V
Total USB Output Current: 3A
DC Output Voltage: 12V
Total DC Output Current: 2A
Short Circuit Recovery Time: 10s
Open Circuit Voltage of Solar Panel: 40V
No Load Loss: 0.05W
Over Voltage Protection: 15V; x2/24V
Float Charge Voltage: 14V; x2/24V
Discharge Recovery Voltage: 12V; x2/24V
Over Discharge Voltage: 10.5V; x2/24V
Control Mode: Software Intelligent Control
Working Temperature: -35~55°C
Item Size: 135 * 100 * 25mm / 5.31 * 3.94 * 0.98in (L * W * H)

Package List:

1 * Solar Charge Controller
2 * DC Cable
1 * User Manual(English)
Note:
Any question during use, please kindly contact our store to get the best after-service.

Product Features

  • LCD screen display >> More clear, more beautiful & more modern
  • Fully automatic >> With output switch, intelligent control, easy to operate
  • Power-efficient >> Microcontroller digital accuracy. Available for DC lamp and phone charging. A key to open and close the load.
  • Rated Discharge Current: 20A; USB Output Voltage: 5V; Total USB Output Current: 3A; DC Output Voltage: 12V
  • Protection functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.

Reblogged 2 weeks ago from www.amazon.com

Comments

  1. Brent says:

    Plus one star for cool, good looking design

  2. Michael S. says:

    Does the job well

  3. Anonymous says:

    When coupled to a 12V solar panel, this charge controller does all the off-grid battery charging and monitoring required to supply 12V for my 1-to-2-day continuous load using an 18AH AGM 12V battery for day-time recharge. I use this PWM controller coupled to a Renogy 30W monocrystaline solar panel. The controller and it’s LCD battery/load metering works as specified; the built-in (2) USB and (2) 12V receptacles are switched ON/OFF by a single button — very convenient to my remote camera/tablet…